Mibet (Xiamen) New Energy Co,. Ltd

ENAURUESPTJP中文

HomeProductsMRac Ground SolutionMRac Ground Terrace VI

MRac Ground Terrace VI

IMG_0016.1.jpg

product presentation

MRac Ground Terrace Ⅵ(GT VI)is a ground solar PV mounting system developed from GT IV for middle-large solar PV projects. GT VI reduces cost while guarantee the structural strength, It also apply to installation area of higher requirement which higher wind and snow resistance.GT VI will realize minor adjustment of all sides by the Adjustable Base. The professional and optimized design also contributes to reducing the time cost and installation.

Technical Parameter

Installation SiteOpen terrain – ground mount
FoundationConcrete Base or Ground Screw
Installation Angle5-60°
Wind Load60m/s
Snow Load1.6KN/m2
PV ModulesFramed, unframed
Module OrientationPortrait or landscape
StandardsAS/NZS 1170

DIN 1055

JIS C 8955:2011

International   Building Code IBC 2009

California   Building Code CBC 2010
Profile MaterialsAl6005-T5(Anodized)
Fasten PartsSUS304
Small ComponentsAl6005-T5(Anodized)
ColorSilvery or according to customer requirements
Warranty10 years

Advantages

  1. Optimization of the design,structural firmer, reduce the cost;

  2. The adjustable anchor plates help to adjust the position of supports, especially when installed on concrete columns or ground screws;

  3. The square tubes are conducive to improving the stability.

  4. If combiner boxes, inverters or back side supports are needed to be fastened to GT VI, They could be installed directly on supports by T bolts without drilling on site.

Product Pictures

GT6.jpg

Components List

轨道60.jpg
Wide End Clamp KitU27 Inter Clamp KitC Clamp KitRail 60
4.jpg5.jpg方管.jpg角铝.jpg

Rail 105

Rail 105 Splice

Tube* Side Support

(55*55Square)

Angle aluminum
预装支架前立柱.jpg10.jpg预装支架后立柱3.jpg
Front Support KitGround ScrewBack Support Kit

Installation Instruction

  1. Pile Ground Screws by pile drivers at certain positions and depth;

  2. Place the Front Support Kit and Back Support Kit on the Ground Screws Flange and then adjust as indicated in solution drawings. Connect the Supports Kit to the Ground Screws by bolt;

  3. Connect Tube*Side Support(55*55Square) to Front Support and Back Support;

  4. Repeate the above steps;

  5. Install Rail 105 and then install Rail 60;

  6. Install Solar Panels;

  7. Complete.

Reference Projects

GT4-.jpg

Workshop

Carbon steel factory owns 15 steel rolling production lines, and 4 solar stent aluminum production lines.

2.jpg

Recommended Products

Recommended Projects

Recommended News & Events